Lift System Parts
Coleman Lift Post Inner Cable
SKU: PA-FLEE4731-5691
$12.60
Part details
Inner Lift Post Cable for Coleman/Fleetwood Campers
This is the replacement inner lift cable used inside the telescoping corner posts of Coleman and Fleetwood pop-up campers. Installed within each vertical lift post, this cable is responsible for raising the inner post sections upward when tensioned by the main lift system — ultimately lifting the roof into position.
This part is a direct replacement for an original inner cable that is frayed, kinked, or broken. It works in coordination with the external long lift cables and pulley system driven by the whiffletree.
CRITICAL INSTALLATION INFORMATION: READ BEFORE ORDERING
This cable is shipped with one end professionally crimped. The opposite end is left unfinished so it can be properly routed through the lift post during installation.
- Installation Process: Thread the loose end of the cable through the lift post’s internal guide tubes. Once fully routed, secure the final fitting using the included ferrule.
- Required Tool: A cable swaging (crimping) tool is required to apply a safe, load-bearing connection. Do not attempt to install using makeshift tools.
- Safety Warning: An improper crimp will result in cable failure during roof operation, potentially causing injury or camper damage.
System & Ordering Information:
Each of the four lift posts in your Coleman or Fleetwood camper requires one inner lift cable. This product listing is for one (1) cable. If you are replacing all four, please set your quantity accordingly. We recommend inspecting all inner cables, as wear and fatigue tend to occur evenly across the system.
Installation: Coleman Lift Cables
Safety: Support the roof with solid props before servicing; cables are under tension.
- Identify the correct cable for your model year (the guide includes replacement cable listings and produced lengths).
- Follow the Replacing the Main Cable procedure in the guide for routing and installation.
- Finish with the Top Height Adjustment procedure — the measurement chart in the guide lists the correct height for each model.
Full guide with diagrams, maintenance tips, and troubleshooting: Coleman/Fleetwood Lift System Guide.
Listed fitments (1)
Check your model, lift system and cable position against these listings and the part details.