Lift System Parts
Jayco Eyebolt – For Lifter Cable
SKU: PA-JAYC0011628
$2.10
Part details
Adjustable Eyebolt for Jayco L&W Lift System Cables
This is a replacement Adjustable Eyebolt for the L&W lift system used in Jayco and Viking pop-up campers. This is a critical component that connects the individual 3/32" lift cables to the harness square. Its primary function is to allow for precise adjustment of the roof's height and levelness.
According to the L&W repair manual, adjusting the nuts on these eyebolts is the correct procedure for leveling the roof. A stripped, bent, or broken eyebolt will prevent you from properly tensioning the cable and leveling the roof, and could lead to a cable detachment.
Product Details:
- Function: Connects a 3/32" lift cable to the harness square and allows for roof height adjustment.
- Compatibility: For Jayco and Viking campers using the L&W lift system.
- Adjustment: Lengthening the eyebolt lowers the corner; shortening it raises the corner.
- Sold Individually.
Installation Note: The L&W repair manual provides specific instructions for replacing the eyebolts. The process involves bracing the roof, removing the nut from the harness square, and swapping the cable to the new eyebolt.
Installation: Replacing an L&W Eyebolt
Safety: Prop the roof with solid supports before servicing. After any repair, raise and lower the roof several times and confirm the door seats properly.
- Raise the roof and brace it securely; remove the winch cover.
- Crank the winch down 4–5 turns to create slack.
- Remove the nut from the eyebolt on the harness square.
- Carefully bend the eye of the old bolt open just enough to slip the cable off.
- Place the cable onto the new eyebolt and carefully bend the eye shut.
- Reverse the previous steps and adjust the final roof height: lengthen an eyebolt to lower that corner, shorten it to raise.
Full guide with diagrams, maintenance tips, and troubleshooting: L&W Lift System Guide.
Listed fitments (1)
Check your model, lift system and cable position against these listings and the part details.