DIY Popup
Camper Guy

Lift System Parts

Jayco Floor Track 1 Pulley 55 X 3/4 Reg Steel Bearing

SKU: PA-JAYC0500123

$84.00

VIN # (17 Characters Long) (required)
Year (required)
Make (required)
Model (required)
Location

Select options to see the configured part price.

Need help identifying your lift system?

Part details

Jayco Floor Spring Track with Regular Pulley (55-Inch)

This is a replacement 55-inch Floor Spring Track for Jayco pop-up campers with the L&W lift system. This track bolts to the floor of the camper and guides the flexible pusher spring. This version includes a pre-installed steel bearing pulley. A damaged track or seized pulley can cause the spring to bind, preventing a corner from lifting correctly.

"Regular" Pulley Orientation

Please verify the orientation of your existing track. For this specific part, the Regular version has the pulley leaning to the right when the track is positioned with the pulley side closest to you.

HOW TO ORDER: Required Information & Verification

To ensure this is the correct part for your specific camper, you must provide the following information using the required fields or in the order notes at checkout:

  1. Your Camper's Year, Make, and Model.
  2. The Location of the Track you are replacing (e.g., Driver's Side Front, Passenger's Side Rear).

There are different versions of these tracks, and this information is essential for us to verify and send the correct part. Missing or incorrect information will delay your order.

Product Details:

  • Jayco Part Number: 0500123
  • Function: Guides the flexible pusher spring along the floor of the camper.
  • Track Dimensions: 3/4" wide x 55" long
  • Pulley: Includes one (1) steel bearing pulley.
  • Orientation: Regular (pulley leans to the right).
  • Sold Individually.
Installation: Replacing a Spring Track / Floor Track

Safety: Prop the roof with solid supports before servicing. After any repair, raise and lower the roof several times and confirm the door seats properly.

  1. Raise the roof and brace it securely.
  2. Remove the lift arm and the spring (procedures in the guide).
  3. Pull the cable out of the spring track and pulley, if the track has a pulley on it.
  4. Remove the necessary cabinets.
  5. Unbolt the spring track from the floor and install the new track.
  6. Reverse the previous steps and adjust the final roof height.

Full guide with diagrams, maintenance tips, and troubleshooting: L&W Lift System Guide.

Repair Guide: Step-by-step procedures, roof-height specs, maintenance tips, and troubleshooting for this system are in our L&W Lift System Guide (Jayco, Viking & Coachmen).

Listed fitments (1)

Check your model, lift system and cable position against these listings and the part details.

Browse more lift parts →

Fresh from the garage

Don’t miss the next teardown.

Email updates aren’t available yet. Browse Repair Guides for lift-system references and repair help.

Browse Repair Guides →