DIY Popup
Camper Guy

PopupCamperGuy parts

Jayco (Most Models)

Select a part category or model series below.

Jayco (Most Models) pop-up camper illustration

Inside a Jayco L&W lift

L&W repair guide
One main cable. Four corner cables.Camper floor viewed from above; two wall edges shown.
One main cable pulls the square harness and four corner cables Simplified camper floor plan with two wall edges shown. The winch pulls the center of the square harness. Four eye bolts connect four separate cables to the corner lift mechanisms. The adjacent corner cutaway shows the cable pulling a drive slug against the push spring. This is a connection diagram, not a model-specific routing template. WinchMain cable Square harness Corner 4Corner 3 Corner 2Corner 1
Inside one lift cornerThe cable pulls the slug; the spring pushes the post up.
Drive slug pushes a flexible spring along the track and up the lift post An elongated slotted steel drive slug sits inside the horizontal spring track. A cable runs around the track pulley to the slug. The long coiled push spring continues from the slug, around the curved corner guide, and upward into the tall telescoping lift post. This is an identification schematic, not a dimensioned assembly drawing. Telescoping lift post Push spring / push rod Long, flexible coil inside the track Drive slug Slotted driver inside the track Curved guide Spring track Lift cable Track pulley

Simplified connections, not to scale. Pulley routes vary by camper.

Match the actual lift hardware

A model name alone does not establish track size or post fit. Compare these details with the original part.

PartVisual cueMatch before ordering
Drive slugElongated slotted driver inside the spring trackListed Jayco sizes: 3/4" or 7/8". Match the existing slug and track; these labels are not the slug's length.
Push spring / push rodLong flexible coil feeding into the postOverall length and end/rivet details. Do not substitute a winch pawl spring.
Lift postNested telescoping metal sectionsTotal stage count, closed length, mounting points, and part number.
Track & curved bracketHorizontal channel and corner guideTrack size, length, handedness, pulley count, and mounting-hole positions.
Lift cable & harnessMain cable, square harness, and four corner cablesCable location, length, diameter, and end fittings. Keep main and corner cables distinct.
Winch & drive hubCrank-driven cable drum and drive hardwareWinch model, front/rear arrangement, shaft, and attachment details.

76 parts

Fresh from the garage

Don’t miss the next teardown.

Email updates aren’t available yet. Browse Repair Guides for lift-system references and repair help.

Browse Repair Guides →