Lift System Parts
Jayco Push Rod 66 1/2
SKU: PA-JAYC0170937
$50.40
Part details
Pusher Spring for Jayco L&W Lift Systems (66 1/2-Inch)
This is the 66 1/2-inch replacement flexible pusher spring for Jayco pop-up campers equipped with the L&W lift system. This is the spring that travels through the system and inside the corner posts to raise the roof[cite: 93, 139, 142]. It's the correct part for a broken, kinked, or fatigued original spring.
How to Verify This Is the Correct Spring
The most important step to ensure you order the correct part is to measure your existing spring.
- Carefully remove the old spring from the spring track.
- Measure its overall length. This replacement spring is 66 1/2 inches long.
Product Details:
- Application: For Jayco L&W lift systems.
- Length: 66 1/2 Inches.
- Function: Replaces a broken or weak pusher spring to restore lifting power.
- Sold Individually: The price listed is for one spring.
Maintenance Tip: Pusher springs work in pairs on the front and rear of the camper. If one has failed, the other has seen the same amount of use. For balanced and reliable lifting, we highly recommend replacing them in pairs.
Installation: Replacing an L&W Push Spring (Push Rod)
Safety: Prop the roof with solid supports before servicing. After any repair, raise and lower the roof several times and confirm the door seats properly.
- Raise the roof and brace it securely.
- Crank the winch down 4–5 turns to create slack.
- Remove the lift arm (procedure in the guide).
- Remove the spring.
- Remove the spring rivet from the end of the old spring and reuse it on the new spring.
- Install the new spring. When placing it back into the spring track, you may have to pry up on the spring to guide it into the track.
- Reverse the previous steps and adjust the final roof height.
Full guide with diagrams, maintenance tips, and troubleshooting: L&W Lift System Guide.
Listed fitments (1)
Check your model, lift system and cable position against these listings and the part details.