Lift System Parts
Jayco Winch – Rear
SKU: PA-JAYC0150305
$236.25
Part details
Rear Winch for Specific Jayco & Viking L&W Lift Systems
This is a replacement rear-mounted winch for specific Jayco and Viking pop-up campers using the L&W lift system. While most L&W systems use a front-mounted winch, some models require this rear winch configuration. This winch is the core mechanism that pulls the main lift cable to raise and lower the camper roof.
IMPORTANT: Cable Not Included
Please be aware that this is the winch assembly only. The main lift cable is sold separately and must be installed onto the new winch during the repair process.
Product Details & Features:
- Direct Replacement: The correct winch for specific rear-winch L&W lift systems.
- Heavy-Duty Gearing: Built to handle the load of the camper roof.
- Application: For specific Jayco and Viking campers requiring a rear-mounted winch.
- Verification: Please visually compare your existing winch to the product photos to ensure you are ordering the correct part for your unique system.
Installation: Replacing the L&W Winch
Safety: Prop the roof with solid supports before servicing. After any repair, raise and lower the roof several times and confirm the door seats properly.
- Raise the roof and brace it securely.
- Remove the winch cover (typically inside a cabinet or dinette seat).
- Crank the winch down 4–5 turns to create slack.
- Remove the nuts from the eyebolts on the harness square.
- Remove the bolts holding the winch to the floor and the screws holding it to the sidewall; remove the old winch.
- Install the main cable onto the new winch, then place the new winch in the unit.
- Reverse the previous steps to reassemble and adjust the final roof height.
Keep the brake pad dry — oil or grease on the pad causes the roof to slip.
Full guide with diagrams, maintenance tips, and troubleshooting: L&W Lift System Guide.
Listed fitments (1)
Check your model, lift system and cable position against these listings and the part details.